2 Way Bagging Off Set Headwork
0 customer reviews
Features: Meets Gas Industry Standards Made in the UK To see our entire gas tooling range click here.
Read More2 Way Bagoff Bypass Head Valve Kit
Features: Meets Gas Industry Standards Made in the UK To see our entire gas tooling range click here.
Read More2 Way Bagset Bypass Valve Set
Features: Meets Gas Industry Standards Made in the UK To see our entire gas tooling range click here.
Read More32mm Top Tee Clamp Kit – Pillar
Features: Conforms to Gas Industry Standard Made in the UK To see our entire electrofusion tooling range click here.
Read More
63mm Pipe Cutter Shears – Short Handle
The plastic pipe ratcheting cutters also often known as secateurs or poly pipe shears offer exceptional ability of cutting polyethylene (PE) pipes. Designed to quickly and precisely cut plastic pipes…
Read More
Air Compressor Hose Rubber Seal
The air compressor hose rubber seal is a direct replacement part for claw couplings, also known as ‘Q’ connectors. It provides a tight seal between the hose and the connector.
Features:
- Simple and easy to replace
- Prevents loss of air pressure and liquids
- Made out of nitrile rubber
- Supplied individually
- Manufactured in the UK
To see our entire safety equipment range, click here.
Allens Gas Leak Detection Fluid 1000ml
Allens gas leak detection fluid, can be used on all types of plastic and metal pipes due to the mixture of surfactants. Features: Simple and easy to use Premixed and…
Read MoreAllens Gas Leak Detection Fluid Concentrate 125ml
Allens gas leak detection consternate fluid, can be used on all types of plastic and metal pipes due to the mixture of surfactants. Commonly used by gas and utility engineers.…
Read More
Aluminium Offset Pipe Wrench 14″ – 24″
The aluminium offset pipe wrench provides an easy entry into tight spots due to its narrow jaw head. Parallel jaws make it ideal for overhead applications as well as confined spaces. The wrench is suitable for single-handed use, which is an extreme benefit for the user. Available in three sizes 14″, 18″, and 24″.
Features:
- Ideal for hard to reach places
- Lightweight, yet strong design
- Replaceable lower jaw
- Handle made out of aluminium
To see our entire general tool range, click here.
Armeg Diamond Core Drill 35mm & 45mm
Features: Available in a range of sizes Supplied individually Made in the UK To see our entire consumable range click here.
Read More
AVK Wask Crimp Tool Set 20mm – 32mm
The AVK Wask pipe crimp tool set has been specifically designed for use with Donkin and other manufacture’s products to provide consistent results. Provides a simple and cost effective method…
Read MoreBagging Off Nose Assembly 3″ – 12″
Features: Meets Gas Industry Standards Made in the UK To see our entire gas tooling range click here.
Read More
Bahco 1/2″ Drive Ratchet – Quick Release
This Bahco ratchet is made from top quality forged alloy steel, which is then chrome plated and finished in matt. It has a push release button for easy and safe operation, as well as an easy direction change switch. The ratchet is ideal for use in hard to reach areas.
Features:
- Spring ball socket retention and quick release button
- 60 teeth with a ratcheting action angle of 6 degrees
- Ergonomic rubber grip handle and hanging hole for easy storage
- Made out of chrome vanadium steel
- Nickel and matt chrome plated finish
- Conforms to ISO 3315/1174-2
To see our entire general tool range, click here.
Bahco Professional Hacksaw Frame – 319
The Bahco 319 professional hacksaw frame has a lightweight, yet strong frame with an internal steel tube core. This allows high blade tension for accurate and straight cutting. The saw offers excellent performance and a 55-degree angle mounting point for flush cuts. It comes complete with a shatterproof blade.
Features:
- Compact and lightweight design
- Steel tube frame with a plastic coating
- Non-slip and comfortable handle
- Straight and 55-degree angle mounting points
- Blade length: 300mm (12″)
- Integrated tension mechanism in the handle
- Supplied with Sandflex bi-metal blade
Manufacturer Part Number: 319
To see our entire general tool range, click here.
Bahco Steel Bolt Cutters – 18″
The Bahco handheld steel bolt cutters are forged from a precision high-grade alloy steel. The bolt cutters offer high cutting power, great accessibility, and are ideal to be used in hard to reach places. The easy to adjust jaws have a maximum cutting capacity of up to 8mm.
Features:
- Forged from precision high-grade alloy steel
- Anti-corrosion treated and black phosphate finish
- Handles with a soft rubber grip
- Good accessibility in confined areas
- Length: 430mm (18″)
- Weight: 1.99kg
Manufacturer Part Number: BAH455918 (4559-18)
To see our entire general tool range, click here.
Brass Hand Inflator Pump Adapter
An adapter to fit brass hand inflator pump used for pressure testing of drain, gas, water, sewer and water pipes.
Features:
- Simple and easy to fit
- Barbed hose connectors
- Made out of brass
To see our entire testing range click here.
Breathing Apparatus Storage Bag – Orange
The breathing apparatus storage bag has been designed to fit a fresh air respirator mask. Ideal to protect it from an outside element and to keep your equipment clean and ready to use.
Features:
- Reflective panel, corners, and metal eyelets
- Drawstrings for easy access and secure storage
- Supplied individually
Please note: Image shown for illustrative purpose only.
To see our entire safety equipment range, click here.
Burnaid Emergency Burn Dressing Kit
The Burnaid emergency burn dressing kit has cooling properties to help halt the progression of the burn and minimise further tissue damage. Used for minor burns, scalds, and sunburns.
Features:
- Simple and easy to apply
- Non-adherent and non-toxic dressing
- Cools, soothes, and helps relieve pain
The kit consists of:
- Dressing pad (100mm x 100mm)
- 5x Gel sachets 3.5g
- Gauze bandage 5cm
Please note: This product is made to order and therefore cannot be cancelled once ordered. As these items are made specifically to your request, they are also excluded from our return policy unless damaged or faulty.
To see our entire safety equipment range, click here.
Butt Fusion Bead Gauge SDR21
welded joints Features: Made in the UK To see our entire electrofusion tooling range click here.
Read MoreButt Fusion Internal Debeader Tool 110mm – 315mm
The butt fusion internal debeader removal tool Features: Simple and easy to use Available in a range of sizes and SDR ratings Made in the UK To see our entire…
Read More
Butt Fusion Machine Pipe Lifter 400mm
The butt fusion machine pipe lifter Features: Simple and easy to use Made in the UK To see our entire PE tooling range click here.
Read More
BW Gas Detector Car Charger – 12V – 24V
The BW Technologies car charger for personal gas atmosphere monitors, also referred to as PAM. Ideal for charging your multi-gas detector on the move to make sure your equipment is ready to use at all times.
Features:
- Simple and easy to use
- Designed to provide power on the go
- Car cigarette lighter adaptor
- 12-24V DC power supply
Suitable for the following gas detectors:
- BW GasAlert MicroClip XT
- BW GasAlert MicroClip XL
- BW GasAlert Quattro
- BW GasAlert MicroClip X3
- BW GasAlert MaxXT II
Manufacturer Part Number: GA-VPA-1
To see our entire safety equipment range, click here.
BW Gas Monitor Mains Charger – 240V
The BW Technologies (Honeywell) mains charger plug for personal atmosphere gas monitors, also known as PAM.
Features:
- Simple and easy to use
- Input AC 100-240V
- Output 6V=500mA
- 3 pin UK charger
Suitable for the following gas detectors:
- BW GasAlert MicroClip XT
- BW GasAlert MicroClip XL
- BW GasAlert Quattro
- BW GasAlert MicroClip X3
- BW GasAlert MaxXT II
Manufacturer Part Number: GA-PA-1-UK
To see our entire safety equipment range, click here.
Caution Gas Main Below Marker Tape – 150mm x 365m
The gas main marker tape provides a visual warning in the trench and helps prevent damage from third-party contractors. Should be used when open-cut techniques are employed, including excavations for service connections, main connections repair activities, and other maintenance activities. This is meant to help minimise the risk of interference damage. The marker tape should be placed at a convenient depth between the backfill and sub-base layers in the road or footpath.
Features:
- Durable, reliable and proven
- 40+ year life expectancy
- Highly resistant to ground chemicals
- Roll size 150mm x 365m
- Free from PVC
- Made in the UK
To see our entire safety equipment range, click here.
Caution Gas Main Below Tracing Tape – 150mm x 365m
The gas main detectable marker tape incorporating a single insulated tracing wire should be used for mains above 2bar. This will enable the position of the main to be determined using a cable locator during pre-excavation surveys and provide a visual indication of the presence of a buried main during excavation. Should be used when open-cut techniques are employed. The warning tape should be placed at a convenient depth between the backfill and the sub-base.
Features:
- Durable, reliable and proven
- Enables the position of the main to be determined
- Help minimise the risk of interference damage
- Built-in tracing wire
- 40+ year life expectancy
- Roll size 150mm x 365m
- Free from PVC
- Made in the UK
To see our entire safety equipment range, click here.
Comark Digital Manometer Gauge
The Comark range of digital manometer pressure testing gauge is available in the following variants: Dry Use Designed for use in applications where the necessary measurement being taken has only…
Read More
Cotton Twill Dust Sheet – REGM34
The Regin Products cotton twill protection dust sheet is ideal for general purpose use, as well as for the protection of furniture and floors, etc.
Features:
- Reusable and machine washable
- Heavyweight cotton twill weave
- 100% natural cotton
- Dimensions 12’ x 9’ (366cm x 274cm)
Manufacturer Part Number: REGM34
To see our entire safety equipment range, click here.
Cowhorn Standpipe Yellow Common Base
The yellow common lower standpipe base is designed to fit cowhorn, also known as bullhorn or 2 part air pressure manifold. Which is a pipework assembly used for taking pressure readings on gas mains and services when carrying out testing and purging operations. Suitable for use in conjunction with all three types of pressure ratings of which include low, medium and high pressure. The stand pipe is supplied complete with a calibration certificate for the period of 12 months from the date of purchase.
Features:
- Simple and easy to use
- Fitted with …….. valve
- Conforms to Gas Industry Standard GIS/TE/P6-3:2013
- Supplied tagged and certificated
- Made in the UK
To see our entire testing range click here.
Cowhorns Air Pressure Testing Manifold LP / MP / HP
The intrinsically safe Druck DPI705E manometer, also commonly known as digital tester is a durable, simple and easy to use gauge designed for pressure testing in hazardous areas. This makes it ideal to be used for pressure testing of polyethylene (PE) pipes. It provides many essential features required for routine maintenance and system troubleshooting applications. Selectable pressure units include the following mbar, bar, Pa, hPa, MPa, psi, lbf/ft², kgf/cm², kgf/m², mmHg (0°C), inHg (0°C), mmH2O, cmH2O, mH2O, inH2O (4°C, 20°C) and ftH2O (4°C, 20°C). The Druck instrument indicator offers long battery life, it can be powered for up to eight hours a day, six days a week for a year using a single set of batteries. Available in a range of pressure ranges 0-2bar, 0-7bar and 0-20bar.
Features:
- Accurate and reliable measurements
- Leak test, zero, tare and filter functions
- Alarm function with audible and visual alerts
- Rugged, impact-resistant and IP54-rated construction
- Integral calibration record with calibration due count-down display
- Integrated desk stand and hanger
- Powered by four AA Alkaline/ NiCd/ NiMH cells
- Conforms to ATEX/IECEx standards
- Supplied with calibration certificate
To see our entire testing range click here.
Cowhorns Pressure Relief Valve – LP / MP / HP
Pressure testing standpipes, also known as cowhorns or bullhorns, are fitted with pressure relief valve (PRV) to prevent a buildup of pressure. The safety valve opens to release pressure when the level becomes too high and closes again when the pressure has dropped to within a safe range. Available in three ratings of which include low, medium and high pressure.
Features:
- Simply and easy to fit
- Direct replacement part
- Available in a range of pressure ratings
- Made out of brass
- BSP male thread
To see our entire testing range click here.
Cowhorns Test Standpipe Gauge – LP / MP / HP
Direct replacement pressure gauge to fit test standpipes, also known as cowhorns, bullhorns or pipework assembly used for taking pressure readings on gas mains and services when carrying out testing and purging operations. Available in three ratings to suit low, medium and high pressure applications of test stand pipes. Supplied complete with a rubber shroud.
Features:
- Simple and easy to fit
- Available in three pressure ratings
- Fitted with a protection shroud
- BSP male thread
To see our entire testing range click here.
Cutting in Bar High Flow Top Tee Saddle Cutter Drive
Features: Made in the UK To see our entire electrofusion tooling range click here.
Read MoreCutting in Bar Top Tee Saddle Cutter Drive
Features: Made in the UK To see our entire electrofusion tooling range click here.
Read MoreCutting in Bar Top Tee Saddle Cutter Drive – 1 meter
Features: Made in the UK To see our entire electrofusion tooling range click here.
Read MoreCutting in Bar Top Tee Saddle Cutter Drive – Extended
Features: Made in the UK To see our entire electrofusion tooling range click here.
Read More
Danger Keep Out Safety Sign – 600mm x 200mm x 1mm
The danger keep out safety sign clearly highlights areas that are considered to be dangerous. This will prevent people from entering the dangerous area, reducing the risk of injuries. Complies with the Health and Safety (Safety Signs and Signals) Regulations 1996.
Features:
- Highlights dangerous areas
- Pre-drilled fixing holes
- Made out of PVC
- Dimensions 600mm x 200mm x 1mm
- Made in the UK
To see our entire safety equipment range, click here.
Digital Manometer Gauge Hose Kit
The medium pressure hose kit is ideal for air testing using digital manometer gauge and/or test standpipe also known as cowhorns or bullhorns. Commonly used by service and main layers.
Features:
- Simple and easy to fit
- Maximum working pressure: 14.4 bar
- Temperature range: -40 to 120°C
The kit consists of:
- 1 meter of 6mm blue tube
- 3/8″ straight tube connector
- 1/2″ x 3/8″ BSP reducing bush
To see our entire testing range click here.
Double Ended Ferrule Key 1/2″ – 1″
Double ended ferrule key suitable for 1/2″, 3/4″ and 1″ water fittings. Features: Simple and easy to use Zinc coated L shaped double ended designed Made in the UK To…
Read More
Down Left Arrow Fire Exit Sign – Jalite 433
The Jalite fire exit safety sign with an arrow down left is required to show evacuees the shortest escape route from a building. This glow in the dark rigid plastic…
Read MoreDrawlock Tool Adapter Bush 16mm – 32mm
Features: Available in a range of sizes Conforms to Gas Industry Standards Made in the UK To see our entire gas tooling range click here.
Read More
Drawlock Tool Spare Expander 16mm – 32mm
The drawlock tool spare expander, also known as a ‘bullet’ is a replacement part to be used in conjunction with a stem tool. Features: Available in a range of sizes…
Read More
Druck Digital Manometer Gauge – DPI705E
The Druck DPI705E manometer, also commonly known as digital tester is a durable, simple and easy to use gauge designed for pressure testing. It provides many essential features required for routine maintenance and system troubleshooting applications. This makes it ideal to be used for pressure testing of polyethylene (PE) pipes. Selectable pressure units include the following mbar, bar, Pa, hPa, MPa, psi, lbf/ft², kgf/cm², kgf/m², mmHg (0°C), inHg (0°C), mmH2O, cmH2O, mH2O, inH2O (4°C, 20°C) and ftH2O (4°C, 20°C). The Druck instrument indicator offers long battery life, it can be powered for up to eight hours a day, six days a week for a year using a single set of batteries. Available in a range of pressure ratings 0-2bar, 0-7bar and 0-20bar.
Features:
- Accurate and reliable measurements
- Leak test, zero, tare and filter functions
- Alarm function with audible and visual alerts
- Rugged, impact-resistant and IP54-rated construction
- Integral calibration record with calibration due count-down display
- Integrated desk stand and hanger
- Powered by four AA Alkaline/ NiCd/ NiMH cells
- Supplied with calibration certificate
To see our entire testing range click here.
Druck Digital Manometer Gauge – DPI705E-IS
The intrinsically safe Druck DPI705E manometer, also commonly known as digital tester is a durable, simple and easy to use gauge designed for pressure testing in hazardous areas. This makes it ideal to be used for pressure testing of polyethylene (PE) pipes. It provides many essential features required for routine maintenance and system troubleshooting applications. Selectable pressure units include the following mbar, bar, Pa, hPa, MPa, psi, lbf/ft², kgf/cm², kgf/m², mmHg (0°C), inHg (0°C), mmH2O, cmH2O, mH2O, inH2O (4°C, 20°C) and ftH2O (4°C, 20°C). The Druck instrument indicator offers long battery life, it can be powered for up to eight hours a day, six days a week for a year using a single set of batteries. Available in a range of pressure ranges 0-2bar, 0-7bar and 0-20bar.
Features:
- Accurate and reliable measurements
- Leak test, zero, tare and filter functions
- Alarm function with audible and visual alerts
- Rugged, impact-resistant and IP54-rated construction
- Integral calibration record with calibration due count-down display
- Integrated desk stand and hanger
- Powered by four AA Alkaline/ NiCd/ NiMH cells
- Conforms to ATEX/IECEx standards
- Supplied with calibration certificate
To see our entire testing range click here.
Durafuse Top Tee Test Piece 32mm – 63mm
The top tee test piece commonly known as tapping saddle testing cap is a reliable and robust tool developed to suit specific manufacturer, in this case Durafuse range of electrofusion saddle fittings. The manifold tester is an easy to use tool which doesn’t require any special tools. Tight seal is formed by simply screwing onto tapping saddle outlet. Fitted with steel tee assembly which has two barbed hose connectors of which one is valved.
Features:
- Simple and easy to use
- Available in two sizes 32 and 63mm
- Fitted with O-ring to ensure the tightness
- Made in the UK
Disclaimer: Durafuse® is a registered trademark of Glynwed Pipe Systems Limited.
To see our entire testing range click here.
Electrofusion 45 Degree Elbow Fitting 50mm – 180mm
Features: Simple and easy to install Suitable for gas and water applications Available in sizes from 50mm to 180mm Made in the UK To see our entire pipe fittings…
Read MoreElectrofusion 90 Degree Elbow Fitting 20mm – 180mm
Features: Simple and easy to install Suitable for gas and water applications Available in sizes from 20mm to 180mm Made in the UK To see our entire pipe fittings…
Read MoreElectrofusion Box 80V Output Leads with 5.6mm Terminal Pins
Features: To see our entire electrofusion tooling range click here.
Read MoreElectrofusion Box Lead Replacement Adapter Pins
Features: To see our entire electrofusion tooling range click here.
Read MoreElectrofusion Box Output Leads 40V 4.0mm & 4.7mm
Features: To see our entire electrofusion tooling range click here.
Read MoreElectrofusion Branch Saddle Fitting 63mm – 180mm
Features: Simple and easy to install Suitable for under-pressure drilling Available in a range of sizes Products comply with BS EN12201 and GIS PL2–4 Made in the UK To see…
Read MoreElectrofusion End Cap Fitting 20mm – 180mm
Features: Simple and easy to install Suitable for gas and water applications Available in sizes from 20mm to 180mm Made in the UK To see our entire pipe fittings…
Read MoreElectrofusion Equal Tee Piece Fitting 20mm – 180mm
Features: Simple and easy to install Suitable for gas and water applications Available in a range of sizes and variations Made in the UK To see our entire pipe…
Read MoreElectrofusion Excess Flow Valve Restricter 20mm – 63mm
Features: Simple and easy to install Available in a range of sizes Conforms to Gas Industry Standards GIS PL2-4, GIS PL2-6 and European Standards EN1555 Made in the UK…
Read MoreElectrofusion Flanged Branch Saddle Fitting 110mm – 180mm
Features: Simple and easy to install Suitable for under-pressure drilling Available in a range of sizes Products comply with BS EN12201 and GIS PL2–4 Made in the UK To…
Read MoreElectrofusion Fusamatic Control Unit Terminal Connectors
ends adapter pins Features: Direct replacement for Fusamatic welding control units Made out of brass Supplied individually To see our entire electrofusion tooling range click here.
Read More
Electrofusion Hand Pipe Scraper
Manual hand pipe scraper is an easy to use tool which can be used for scraping polyethylene (PE) pipes prior to electrofusion process. Supplied with 4 sided blade. Available in…
Read MoreElectrofusion High Flow Saddle Tapping Tee 63mm – 200mm
Features: Simple and easy to install Available in a range of sizes and variations Made in the UK Imperial fitting capability: 63mm – 2″ 90mm – 3″ 125mm –…
Read MoreElectrofusion Isolation Ball Valve 32mm – 90mm
Features: Simple and easy to install Suitable for gas and water applications Available in sizes from 32mm to 90mm Conforms to Gas Industry Standards GIS PL2-4, GIS PL2-6 and…
Read MoreElectrofusion Metal Body Welding Mega Clamp 63mm
Features: Simple and easy to use Lightweight, yet strong construction Made in the UK To see our entire electrofusion tooling range click here.
Read More
Electrofusion Pipe Marker Pen – Gold
The Pilot super colour marker pen offers long lasting marking on a wide variety of surfaces. Making it ideal for marking up pipes during preparation, buttfusion and electrofusion process. Features:…
Read More
Electrofusion Purge & Top Tee Adapter 32mm – 63mm
The electrofusion purge tee adapter is a reusable fitting required to fit on the PurgeTee™ outlet, to facilitate pressure test or purge commissioning tooling. Due to the fact it reduces number of electrofusion joints it’s time and cost effective. It’s also suitable for use with tapping saddle top tee and purge tee fittings. It converts the thread on the tapping tee outlet into a female BSP thread for test, purge and vent points, temporary bypass connection, as well as a pressure monitoring point applications. Available in two different sizes 32mm x 1″ and 63mm x 2″ BSP which are suitable for male threaded metallic connections.
Features:
- Simple and easy to install
- Suitable for top and purge tees
- Suits Radius® range of tapping saddles
- Manufactured out of solid aluminium
- Conforms to Gas Industry Standards PL2:4
- Made in the UK
Manufacturer Part No.
- FT0655 – 32mm x 1″ BSP female
- FT0656 – 63mm x 2″ BSP female
Disclaimer: Radius® is a registered trademark of Radius Systems Limited.
To see our entire testing range click here.
Electrofusion Purge Tee Saddle – 32mm Outlet
Features: Simple and easy to install Suitable for purging, testing and pressure monitoring Available in a range of sizes and variations Made in the UK Imperial fitting capability: 63mm…
Read MoreElectrofusion Purge Tee Saddle – 63mm Outlet
Features: Simple and easy to install Suitable for purging, testing and pressure monitoring Available in a range of sizes and variations Made in the UK Imperial fitting capability: 63mm…
Read MoreElectrofusion Reducing Adapter Pins
Features: Shielded body for an extra protection Made out of brass Supplied individually To see our entire electrofusion tooling range, click here.
Read MoreElectrofusion Reducing Coupler Fitting 20mm – 180mm
Features: Simple and easy to install Suitable for gas and water applications Available in a range of sizes and variations Made in the UK To see our entire pipe…
Read MoreElectrofusion Reducing Imperial Coupler Fitting 3/4″ – 6″
Features: Simple and easy to install Available in a range of sizes and variations Made in the UK To see our entire pipe fittings range click here.
Read MoreElectrofusion Saddle Adapter Plate 63mm – 125mm
Available in two size ranges 63mm to 90mm and 63mm to 125mm. Branch saddle. Features: Made in the UK To see our entire electrofusion tooling range click here.
Read MoreElectrofusion Scraper/Blades/Mirror Set
An electrofusion set of tools and accessories Features: The set consists of: Large electrofusion hand pipe scraper 2x pipe scraper replacement blade inspection aluminium frame mirror To see our entire…
Read MoreElectrofusion Straight Coupler Fitting 20mm – 180mm
Features: Simple and easy to install Suitable for gas and water applications Available in sizes from 20mm to 180mm Made in the UK To see our entire pipe fittings…
Read MoreElectrofusion Stub Flange Gasket 63mm – 180mm
Features: Simple and easy to install Available in a range of sizes and variations Conforms to Gas Industry Standards and European Standards Made in the UK To see our…
Read MoreElectrofusion Terminal Pins 90 Degree Adapter
connectors Features: To see our entire electrofusion tooling range click here
Read MoreElectrofusion Top Tee Saddle – Tapping Type 32mm – 180mm
Features: Simple and easy to install Available in a range of sizes and variations Made in the UK Imperial fitting capability: 63mm – 2″ 90mm – 3″ 110/125/140mm –…
Read MoreElectrofusion Turbo Pipe Scraper Attachment
The turbo pipe scraper attachment is specifically designed to be used in conjunction with a cordless drill. Lightweight and compact size makes it ideal to be used in hard to…
Read MoreElectrofusion Unequal Reducing T-Piece Fitting 20mm – 180mm
Features: Simple and easy to install Suitable for gas and water applications Available in a range of sizes and variations Made in the UK To see our entire pipe…
Read MoreElectrofusion Welding Adapter Pins 4.0mm – 4.7mm
Features: Shielded body for an extra protection Made out of brass Supplied in a pack of 2 To see our entire electrofusion tooling range click here.
Read MoreElectrofusion Welding Alignment Clamp – Plastic Body
The electrofusion welding alignment clamp Available in two size ranges 20mm to 40mm and 32mm to 63mm. fusion 2 way Features: Lightweight, yet strong construction Made in the UK To…
Read MoreElectrofusion Welding Alignment Variable Clamp 63mm – 75mm
Features: Made in the UK To see our entire electrofusion tooling range click here.
Read More
Electrofusion Welding Box Bushes
Anti vibration bobbin isolator bush for electro-services fusion control unit Electro-Services Features: To see our entire electrofusion tooling range click here.
Read More
Electrofusion Welding Clamp T-Piece Attachment
The electrofusion welding clamp t-piece attachment often referred to as 3 away adapter or T type connector have been designed to be used in conjunction with alignment clamp (sold separately).…
Read More
Electrofusion Welding Cleaning Wipes – 70% & 90%
The electrofusion welding cleaning wipes provide a high evaporation rate and are ideal for ensuring a clean, grease free and dry joint. These industrial grade wipes have a high content…
Read MoreElectrofusion Welding Control Unit Adapter Pins – 5.6mm
electrofusion box control unit terminal ends connectors 80V adapter pins welding output leads Features: Simple and easy to replace Made out of solid brass Made in the UK To see…
Read MoreElectrofusion Welding Mini Metal Body Clamp 20mm 25mm 32mm
Features: Made in the UK To see our entire electrofusion tooling range click here.
Read MoreEmergency Control Valve Socket – 1/2″ Drive
Features: Simple and easy to use Suits 1/2″ drive ratchets Manufactured in the UK To see our entire gas tooling range click here.
Read MoreEMID Mains Plug Spanner Wrench
Features: Simple and easy to use One tool fits all EMID plug sizes Increased safety, productivity and efficiency Compact and lightweight design Made in the UK To see our…
Read MoreEnd Pipe Pressure Tester – 17.5mm & 20mm
The pipe pressure tester also referred to as end test piece is a robust test piece manifold designed to fit into end of the pipe to enable time and cost efficient testing of low pressure gas services. The combination tester is an easy to use tool which doesn’t require any special tools. Tight seal is formed by simply screwing knurled wheel which expands O-rings. Fitted with two barbed hose connectors of which one is valved. Suitable for Serviflex®, 17.5mm and 20mm polyethylene (PE) pipes.
Features:
- Simple and easy to use
- Cost and time effective
- Knurled screw-down wheel
- Made in the UK
To see our entire testing range click here.
External Debeader Removal Tool 63mm – 1200mm
The butt fusion external debeader also referred to as bead removal tool is a robust and easy to use tool designed to facilitate removal of beads created during butt fusion…
Read MoreExternal Debeader Spare Blade 63mm – 900mm
Spare blade suitable for butt fusion external debeader also referred to as bead removal tool. Available in four sizes to suit pipe sizes ranging from 63mm to 90mm. Features: Simple and…
Read More
External Pipe Measuring Caliper 6″ – 60″
The external pipe measuring caliper is an ideal tool to measure the outside diameter and ovality of pipes. Lightweight, yet strong design that can be used to measure any material. Stiff rivet joint offers a firm and rigid friction.
Features:
- Simple and easy to use
- Available in a range of sizes
- Hardened points and flat legs
- Made out of high quality steel
- Meets DIN 6782-6486 specification
Measuring capacity in mm:
- 6″ – 150mm
- 12″ – 300mm
- 24″ – 600mm
- 36″ – 1000mm
- 48″ – 1200mm
- 60″ – 1600mm
To see our entire general tools range click here.
Eye Wash Station Health & Safety Kit
An eye wash station kit is the most important health and safety product when it comes to emergency eye irrigation and cleansing. It holds all the supplies needed to physically wash the eyes in the event that they may be contaminated by foreign materials or substances. It helps to reduce pain and the risk of infection. Suitable for both home and commercial use. Refills are available for this kit.
Features:
- Built-in carry handle
- Suitable for eye irrigation and cleansing
- Fully stocked with eye wash supplies
- Bracket and fixings included for the wall mounting
- Complies with HSE guidelines
To see our entire safety equipment range, click here.
Ferrule Key Socket Attachement- 1/2″ – 1″
Ferrule key socket attachment Suitable for 1/2″, 3/4″ and 1″ water fittings. Features: Simple and easy to use Available in two variations 1/2″ drive socket attachment Zinc coated Made in…
Read More
Fire Retardant Hi-Vis Trousers – FR AS
The Beeswift ® fire retardant hi-vis trousers provide the maximum level of safety protection and wear comfort. Highly durable, and made out of flame-resistant and anti-static fabric with outstanding ARC flash protection properties. Conforms to CE and EN standards.
Features:
- Available in a range of sizes
- Flame resistant and anti-static fabric
- Very robust yet soft and comfortable to wear
- 320gsm fabric and YKK brass zip fly
- Two vertical side seam access pockets
- 50mm flame resistant and anti-static reflective stripe
- Made to the highest standards of quality
Manufacturer Part Number: CFRASTET
Meets the following standards:
- EN ISO 11612: 2008 A1, B1, C1
- EN1149-5: 2008 Electrostatic Surface Resistivity
- EN ISO 20471 Class 1 high visibility
Disclaimer: Beeswift® is a registered trademark of Beeswift Limited.
To see our entire safety equipment range, click here.
First Aid Health & Safety Kit
A first aid kit is the most important health and safety product when it comes to emergency care. It holds all of the necessary supplies to treat minor injuries. Suitable for both home and commercial use. Refills are available for this kit.
Features:
- Built-in carry handle
- Fully stocked with first aid supplies
- Bracket and fixings included for the wall mounting
- Complies with HSE guidelines
To see our entire safety equipment range, click here.
Flange Pipe Rubber Gasket 50mm – 200mm
Features: Available in sizes from 50mm to 200mm Manufactured in the United Kingdom To see our entire pipe fittings range click here.
Read More
Footprint Adjustable Pipe Wrench 7″ – 12″
The footprint adjustable pipe wrench is an all purpose tool that suits a host of needs. Commonly used by plumbers and field engineers all over the world. The wrench has an added benefit of the thumb-turn nut that provides an easy adjustment and allows the user to adjust the size with one hand. The hardened teeth maintain maximum grip. Available in three sizes 7″, 9″, and 12″.
Features:
- Available in a range of sizes
- Adjustable jaw and thumbscrew
- Precision hardened and accurately machined teeth
- Hook and frame made from a high quality carbon steel
- Made in the UK
Wrench Size | Jaw Adjustments:
- 7″ (175mm) – 1/16” – 1 1/2” (1.5mm – 38mm)
- 9″ (225mm) – 1/8” – 2 1/2” (3mm – 64mm)
- 12″ (300mm) – 1/4” – 3” (6mm – 75mm)
To see our entire general tool range, click here.
Fusamatic 40V Electrofusion Box Output Leads
Features: Only suitable for 40V welding control units Available in a range of sizes Made out of brass To see our entire electrofusion tooling range click here.
Read MoreFusion Alignment Metal Body Welding Clamp – 32mm & 63mm
electrofusion Features: Made in the UK To see our entire electrofusion tooling range click here.
Read MoreGalvanised Steel Pipe Bracket 3/4″ – 2″
Features: Available in sizes from 3/4″ to 2″ Pre-drilled fixing holes Made out of malleable iron steel Manufactured in the United Kingdom To see our entire pipe fittings range…
Read MoreGas ECV Test Piece – 3/4″
The meter box test piece is a reliable and robust tool designed to be attached directly to the gas emergency control valve (ECV). Suitable for testing, monitoring and low gas pressure applications. Fitted with two 8mm barbed hose connectors of which one is valved. Swivel base fitting makes it ideal to be used in hard to reach spaces. The service test manifold can be supplied with a set of three brass adapters which will enable to test via 3/4″ and 1″ BSP male threaded pipe ends, as well as 1″ ECV’s.
Features:
- Simple and easy to use
- Ideal for pressure testing or monitoring
- Swivel brass union fitting and metal valve lever
- Main body made out of solid aluminium
- Anodised body for an extra protection
- Comes complete with a rubber seal
- Made in the UK
Optional fitting set consists of:
- 3/4″ BSP pipe thread adapter
- 1″ BSP pipe thread adapter
- 1″ ECV gas meter connector
To see our entire testing range click here.
Gas Meter Brass Union Spanner
Double ended spanner for gas meter brass union and adapter Features: Simple and easy to use Suitable for 3/4″ and 1″ meter unions and adapters Chrome Vanadium To see our…
Read More