mbw logo

36.5″ & 2.5″ MBW Soil Pick PRO Barrel & Nozzle Set

0 customer reviews

The 36.5″ & 2.5″ MBW soil pick Pro barrel and nozzle set has been specifically designed so it can be easily changed for angled attachments, as well as once worn out to be replaced at a fraction of the cost of the new barrel. Comes complete with a protective rubber deflector.

Features:

  • Available in 3 models 80, 125, 160 CFM*
  • Non-conductive and non-sparking barrel and nozzle
  • Lightweight, yet durable construction
  • Air stream velocity of 1475mph (2375km/h)
  • Supplied with a rubber deflector
  • Made in the USA

Manufacturer Part Numbers:

  • 03820/PRO – SP80 – 80 CFM*
  • 03813/PRO – SP125 – 125 CFM*
  • 17594/PRO – SP160 – 160 CFM*

* CFM is an abbreviation for cubic feet per minute (cu ft/min)

To see our entire safety equipment range, click here.

Read More
mbw logo

36.5″ MBW Soil Pick PRO Barrel & Rubber Deflector

0 customer reviews

The 36.5″ MBW soil pick Pro extension barrel has been specifically designed for those using accessories. It provides an easy change between straight and angled attachments. In addition to this, once end nozzle has been worn out, it can be replaced at a fraction of the cost of the new barrel. Comes complete with a protective rubber deflector.

Features:

  • 36.5″ (93cm) length extension tube
  • Non-conductive and non-sparking barrel
  • Lightweight, yet durable construction
  • Air stream velocity of 1475mph (2375km/h)
  • Supplied with a rubber deflector
  • Made in the USA

Manufacturer Part Number: 21613

To see our entire safety equipment range, click here.

Read More
mbw logo

42″ MBW Soil Pick Barrel & Rubber Deflector

0 customer reviews

The 42″ MBW soil pick straight barrel is specifically designed to help access hard to reach places. It cannot be used in conjunction with angled attachments.

Features:

  • Available in 3 models 80, 125, 160 CFM*
  • 42″ (106cm) length tube
  • Non-conductive and non-sparking barrel
  • Lightweight, yet durable construction
  • Air stream velocity of 1475mph (2375km/h)
  • Supplied complete with a rubber deflector
  • Made in the USA

Manufacturer Part Numbers:

  • 03820 – SP80 – 80 CFM*
  • 03813 – SP125 – 125 CFM*
  • 17594 – SP160 – 160 CFM*

* CFM is an abbreviation for cubic feet per minute (cu ft/min)

To see our entire safety equipment range, click here.

Read More
42" mbw soil pick straight extension - 03848

42″ MBW Soil Pick Straight Extension – 03848

0 customer reviews

The 42″ MBW soil pick straight extension is specifically designed to help access hard to reach places. It can also be used in conjunction with angled attachments. Up to three extensions can be added to the soil pick at the same time.

Features:

  • 42″ (106cm) length extension tube
  • Non-conductive and non-sparking barrel brass ends
  • Lightweight, yet durable construction
  • Air stream velocity of 1475mph (2375km/h)
  • Made in the USA

Manufacturer Part Number: 03848

To see our entire safety equipment range, click here.

Read More
msa turbo-flo breathing apparatus turbine unit - 110V

Breathing Apparatus Turbine Unit – 110V

0 customer reviews

The breathing apparatus turbine unit, also referred to as turbo flow, is designed to be used in conjunction with a fresh air respirator mask kit. The Turbo-Flo blower is small, light, robust, efficient, and very easy to operate. Since the air supply is practically unlimited, the user can work without time restrictions. The blower draws fresh air and pumps it through the air supply hoses with a length of 9m to 54m. Supported air can be supplied to one or two users. The minimum flow volume per user is 120 l/min. The flow volume is individually adjustable at the blower.

Features:

  • Simple and easy to use
  • IP54 protection from dusts and liquids
  • Steel casing and nylon potentiometer knob
  • Conforms to EN138 Class 2 and EN136 Class 2
  • Meets requirements of EN 60335 1:2012+A11

To see our entire gas tooling range, click here.

Read More
richard carter cable laying insulating shovel - 5" x 11"

Cable Laying Insulating Shovel – 5″ x 11″

0 customer reviews

The Richard Carter cable layer insulated shovel, also known as the 1-way, has been designed for cable and pipe laying. Shocksafe® range offers a wide selection of digging and striking tools continually developed for and with, professionals for over 15 years. Integrated treads provide better grip, increased comfort, and protection for the user’s feet. The polyfibre handle offers optimum strength and insulating properties. A triple-reinforced and extra-wide grip section is tailored to accommodate work gloves and larger hands. Made in conformance with BS8020:2011 and flash tested to 10,000 Volts.

Features:

  • Ideal for digging out narrow trenches
  • Integrated spade treads for increased comfort and protection
  • Individually traceable
  • Conforms to BS8020:2011 standards
  • Shocksafe® insulated handle measuring 711mm (28″)
  • Spade size 130mm (5″) wide tapering to 115mm (4.1/2″) by 280mm (11″) long
  • Weight: 2.1kg
  • Made in the UK

Manufacturer Part Number: CLTRPFINS

To see our entire general tool range, click here.

Read More
health and safety dry powder fire extinguisher

Dry Powder Fire Extinguisher

0 customer reviews

The dry powder fire extinguisher is suitable for class A, B, C, and electrical fires. Available in two weight options, 6kg and 9kg.

Features:

  • Seamless with no visible welds
  • Mounting bracket and pressure gauge
  • Fully rechargeable
  • Made in the UK

To see our entire safety equipment range, click here.

Read More
temporary image

Excavation Depth Measuring Gauge

0 customer reviews

The excavation depth measuring gauge has been designed to give operatives the opportunity to continually access the depth of an excavation they are working in and know when temporary shuttering is required for their safety.

Features:

  • Simple and easy to use
  • Ideal for quick compliance checks
  • Made out of 10mm Foamex board
  • Manufactured in the UK

To see our entire safety equipment range, click here.

Read More
temporary image

Excavation Reinstatement Depth Gauge

0 customer reviews

The excavation and reinstatement depth measuring gauge has been designed to complete quick compliance checks and avoid charges for reworks. This can be costly if not reinstated correctly and may come from a company’s profit. It ensures you are always in compliance with the Specification of the Reinstatement of Openings in Highways (SROH) which outlines the standards for reinstating streets. Anyone who carries out street work must reinstate the street once the work is finished, in line with these standards.

Features:

  • Simple and easy to use
  • Predetermined engraved depths
  • Eliminates unnecessary costs and charges
  • Ideal for quick compliance checks
  • Designed to meet SROH standards
  • Made in the UK

To see our entire safety equipment range, click here.

Read More

Fein Air Reciprocating Saw Kit

0 customer reviews

A Fein compressed air powered reciprocating saw is a heavy duty tool which is ideally suited for trimming pipes and shaped section made of steel, ductile iron, cast iron, autoclaved aerated concrete and plastics. Maximum cutting capacity is pipes up to 440mm in diameter (when used with clamp attachment) and profile sections up to 290mm x 500mm.

Features:

  • Simple and easy to use
  • Operating pressure: 6 Bar
  • Air consumption: 1.45 m3/min
  • Weight: 7.2kg

 

The kit contains:

  • Fein pneumatic reciprocating saw
  • Pipe clamp attachment
  • Additional handle
  • Lockable hose claw coupling
  • Tool set and keys
  • 2x HSS blades

 

Manufacturer’s Part No. STS 325 R / 75340800000

 

To see our entire metallic tooling range click here.

Read More

Fresh Air Breathing Apparatus Complete Kit

0 customer reviews

The Nevis fresh air breathing apparatus kits are suitable for gas works, confined spaces, fuel tanks, utility works, as well as aerospace. This particular set has been specifically developed for use in oxygen deficient atmospheres, and is deemed intrinsically safe for use in ATEX and high hazard environments. Available in three sizes small, medium, and large.

Features:

  • Flame retardant webbing and foam pad
  • Stainless steel strainer and anchor pin
  • Heavy duty storage case with transport handle
  • Can be used in conjunction with the air flow turbine unit
  • Intrinsically safe and ATEX certificated
  • Conforms to EN138:1994 Class 2 and EN136:1998 Class 2

The kit consists of:

  • Full face mask respirator
  • Air hose with two connectors
  • Waist belt
  • Breathing hose
  • Strainer and anchor pin assembly
  • Flash hood
  • Storage bag for mask
  • Plastic storage case with a handle

Please note: The system should be maintained annually by an authorised service centre.

To see our entire safety equipment range, click here.

Read More
richard carter general service insulated shovel - 7" x 11"

General Service Insulated Shovel – 7″ x 11″

0 customer reviews

The Richard Carter cable layer insulated shovel, also known as the 2-way, has been designed for digging and cleaning out narrow trenches for cable and pipe laying. Shocksafe® range offers a wide selection of digging and striking tools continually developed for and with, professionals for over 15 years. Integrated treads provide better grip, increased comfort, and protection for the user’s feet. The polyfibre handle offers optimum strength and insulating properties. A triple-reinforced and extra-wide grip section is tailored to accommodate work gloves and larger hands. Made in conformance with BS8020:2011 and flash tested to 10,000 Volts.

Features:

  • Ideal for digging and cleaning trenches
  • Integrated spade treads for increased comfort and protection
  • Individually traceable
  • Conforms to BS8020:2011 standards
  • Shocksafe® insulated handle measuring 711mm (28″)
  • Spade size 180mm (7″) wide by 280mm (11″) long
  • Weight: 2.3kg
  • Made in the UK

Manufacturer Part Number: TRTRPFINS

To see our entire general tool range, click here.

Read More
richard carter grafter newcastle drainer shovel - 7" x 16"

Grafter Newcastle Drainer Shovel – 7″ x 16″

0 customer reviews

The Richard Carter newcastle drainer insulated shovel, also known as a grafter, has been designed for cable and pipe laying. Shocksafe® range offers a wide selection of digging and striking tools continually developed for and with, professionals for over 15 years. Integrated treads provide better grip, increased comfort, and protection for the user’s feet. The polyfibre handle offers optimum strength and insulating properties. A triple-reinforced and extra-wide grip section is tailored to accommodate work gloves and larger hands. Made in conformance with BS8020:2011 and flash tested to 10,000 Volts.

Features:

  • Ideal for digging out narrow trenches
  • Integrated spade treads for increased comfort and protection
  • Individually traceable
  • Conforms to BS8020:2011 standards
  • Shocksafe® insulated handle measuring 711mm (28″)
  • Spade size 180mm (7″) wide tapering to 100mm (4″) by 405mm (16″) long
  • Weight: 2.8kg
  • Made in the UK

Manufacturer Part Number: 16TRPFINS

To see our entire general tool range, click here.

Read More
mbw high velocity soil pick tool

High Velocity Soil Pick Tool

0 customer reviews

The high velocity soil pick is a selective excavator tool. Selective in the sense that it fractures, pulverises, and displaces porous and semi-porous soils, yet leaves non-porous objects unaffected. It excavates soil without the risk of damaging buried utilities by using a supersonic jet of air. It employs converging and diverging nozzle technology to accelerate compressed air to supersonic speed (up to 1475 mph). The high velocity air stream travels approximately 4″ from the end of the nozzle before decompressing to atmospheric pressure with sufficient violence to pulverise and displace soil.

Non-conductive and non-sparking tools are of obvious benefit to those working in environments that may be gas-enriched and/or be in close proximity to live electric cables.

Above all, it requires no periodic maintenance. A pressure gauge on the handle assembly advises the operator if the tool is working at an acceptable pressure. Therefore, it ensures maximum performance at all times. The high velocity soil pick tool weighs only 3kg, has zero vibration and, as a result, can be used for extended periods without fatigue.

Features:

  • Non-conductive and non-sparking barrel and nozzle
  • Large rubber deflector offers additional protection to the user
  • Built-in pressure gauge to ensure maximum performance
  • Air stream velocity of 1475mph (2375km/h)
  • Made in the USA

Manufacturer Part Number:

  • SP80 – 80 CFM*
  • SP125 – 125 CFM*
  • SP160 – 160 CFM*

* CFM is an abbreviation for cubic feet per minute (cu ft/min)

Effective cutting depth:

  • SP80 – 100mm (4″)
  • SP125 – 100mm (4″)
  • SP160 – 200mm (8″)

Air volume:

  • SP80 – 2265 L/Min
  • SP125 – 3540 L/Min
  • SP160 – 4531 L/Min

Optional accessories:

  • 42″ extension tube
  • 21″ extension tube
  • 45 degree end nozzle
  • 90 degree end nozzle
  • Water sprayer nozzle attachment kit
  • Soft shell carry case
  • Hard sided carry case

To see our entire safety equipment range, click here.

Read More
richard carter insulated chisel point crowbar pry bar

Insulated Chisel Point Crowbar Pry Bar

0 customer reviews

The Richard Carter insulated handle chisel and point crowbar, also known as a pry or wrecking bar, designed for opening, prying, chiseling, and leveraging applications. Shocksafe® range offers a wide selection of digging and striking tools continually developed for and with, professionals for over 15 years. Fibreglass handle offers optimum strength and insulating properties.  Made in conformance with BS8020:2011 and flash tested to 10,000 Volts.

Features:

  • Double ended chisel and point end
  • Individually traceable
  • Conforms to BS8020:2011 standards
  • Shocksafe® insulated handle measuring 1500mm (60″)
  • Head size: 35mm at flat end
  • Weight: 7.5kg
  • Made in the UK

Manufacturer Part Number: 60CPBFGINS

Disclaimer: Shocksafe® is a registered trademark of Richard Carter Limited.

To see our entire general tool range, click here.

Read More
richard carter insulated handle chisel crowbar pry bar

Insulated Handle Chisel Crowbar Pry Bar

0 customer reviews

The Richard Carter insulated handle crowbar, also known as a pry or wrecking bar, designed for opening, prying, chiseling, and leveraging applications. The flat chisel head enables a tool to be used as a lever. Shocksafe® range offers a wide selection of digging and striking tools continually developed for and with, professionals for over 15 years. Fibreglass handle offers optimum strength and insulating properties. Made in conformance with BS8020:2011 and flash tested to 10,000 Volts.

Features:

  • Single chisel end
  • Individually traceable
  • Conforms to BS8020:2011 standards
  • Shocksafe® insulated handle measuring 1500mm (60″)
  • Head size: 35mm at flat end
  • Weight: 6kg
  • Made in the UK

Manufacturer Part Number: 60CBFGINS

Disclaimer: Shocksafe® is a registered trademark of Richard Carter Limited.

To see our entire general tool range, click here.

Read More

Insulated Handle Point Crowbar Pry Bar

0 customer reviews

The Richard Carter insulated handle crowbar, also known as pry or wrecking bar, designed for opening, prying, chiseling and leveraging applications. The point head makes a tool to be used as a lever. Shocksafe® offers a wide range of digging and striking tools continually developed for and with, professionals for over 15 years.Fibreglass handle offers optimum in strength and insulating properties. Tested and made in conformance with BS8020:2011.

 

Features:

  • Single point end
  • Individually traceable
  • Conforms to BS8020:2011 standards
  • Shocksafe® insulated handle measuring 1500mm (60″)
  • Weight: 5.5kg
  • Made in the UK

 

Manufacturer’s Part No. 60PBFGINS

 

Disclaimer: Shocksafe® is a registered trademark of Richard Carter Limited.

 

To see our entire general tools range click here.

Read More
richard carter insulated handle sledge hammer 7lb - 14lb

Insulated Handle Sledge Hammer 7lb – 14lb

0 customer reviews

The Richard Carter sledge hammer is a double-faced tool with a long insulated handle, designed to be held with both hands. Shocksafe® range offers a wide selection of digging and striking tools continually developed for and with, professionals for over 15 years. Fibreglass handle offers optimum strength and insulating properties. Made in conformance with BS8020:2011 and flash tested to 10,000 Volts.

Features:

  • Striking head with two faces
  • Rubberised grip increases comfort
  • Individually traceable
  • Conforms to BS8020:2011 standards
  • Shocksafe® insulated handle measuring 914mm (36″)
  • Made in the UK

Manufacturer Part Number | Weight:

  • 7lb – 07DFFGINS | 4.1kg
  • 10lb – 10DFFGINS | 5.9kg
  • 14lb – 14DFFGINS | 7.25kg

Disclaimer: Shocksafe® is a registered trademark of Richard Carter Limited.

To see our entire general tool range, click here.

Read More
mbw soil pick 5 piece kit supplied complete with carry case

MBW Air Soil Pick Kit c/w Carry Case – 5 Piece

0 customer reviews

The MBW air soil pick is a selective excavator tool. Selective in the sense that it fractures, pulverises, and displaces porous and semi-porous soils, yet leaves non-porous objects unaffected. It excavates soil without the risk of damaging buried utilities by using a supersonic jet of air. It employs converging and diverging nozzle technology to accelerate compressed air to supersonic speed (up to 1475 mph). The high velocity air stream travels approximately 4″ from the end of the nozzle before decompressing to atmospheric pressure with sufficient violence to pulverise and displace soil.

Non-conductive and non-sparking tools are of obvious benefit to those working in environments that may be gas-enriched and/or be in close proximity to live electric cables.

Above all, it requires no periodic maintenance. A pressure gauge on the handle assembly advises the operator if the tool is working at an acceptable pressure. Therefore, it ensures maximum performance at all times. The MBW air soil pick weighs only 3kg, has zero vibration, and, as a result, can be used for extended periods without fatigue.

Features:

  • Non-conductive and non-sparking barrel and nozzle
  • Large rubber deflector offers additional protection to the user
  • Built in pressure gauge to ensure maximum performance
  • Air stream velocity of 1475mph (2375km/h)
  • Made in the USA

The kit consists of:

  • Soil pick – choice of 80, 125, or 160 CFM*
  • 45 degree nozzle attachment
  • 90 degree nozzle attachment
  • 21″ (53cm) straight extension barrel
  • 42″ (106cm) straight extension barrel
  • Hard sided and storage case

*CFM is an abbreviation for cubic feet per minute (cu ft/min)

Effective cutting depth:

  • SP80 – 100mm (4″)
  • SP125 – 100mm (4″)
  • SP160 – 200mm (8″)

Air volume:

  • SP80 – 2265 L/Min
  • SP125 – 3540 L/Min
  • SP160 – 4531 L/Min

To see our entire safety equipment range, click here.

Read More
mbw soil pick carry case - hard sided - 19358

MBW Soil Pick Carry Case – Hard Sided – 19358

0 customer reviews

The MBW soil pick case is designed to keep your soil pick tool and accessories. A rugged case that provides a great level of protection.

Features:

  • Fits all MBW soil picks
  • Lightweight, yet durable construction
  • Made out of high quality and durable material
  • Manufactured in the USA

Manufacturer Part Number: 19358

Please note: Accessories shown are not included, and picture is for illustration purposes only.

To see our entire safety equipment range, click here.

Read More
mbw logo

MBW Soil Pick PRO Version Kit

0 customer reviews

The MBW high velocity soil pick is a selective excavator tool. Selective in the sense that it fractures, pulverises, and displaces porous and semi-porous soils, yet leaves non-porous objects unaffected. It excavates soil without the risk of damaging buried utilities by using a supersonic jet of air. It employs converging and diverging nozzle technology to accelerate compressed air to supersonic speed (up to 1475 mph). The high velocity air stream travels approximately 4″ from the end of the nozzle before decompressing to atmospheric pressure with sufficient violence to pulverise and displace soil.

Non-conductive and non-sparking tools are of obvious benefit to those working in environments that may be gas-enriched and/or be in close proximity to live electric cables.

Above all, it requires no periodic maintenance. A pressure gauge on the handle assembly advises the operator if the tool is working at an acceptable pressure. Therefore, it ensures maximum performance at all times. The MBW soil pick weighs only 3kg, has zero vibration and, as a result, can be used for extended periods without fatigue.

The MBW soil pick Pro is the model of choice for those using accessories. The barrel comes in two pieces 36.5″ straight length and 2.5″ nozzle. The main benefits of the Pro model are the easy change of accessories and the cost-effective solution, as the end piece can easily be replaced at a fraction of the cost of a new barrel.

Features:

  • Available in three models 80, 125, and 160 CFM*
  • Easy change of accessories
  • Cost effective solution
  • Made in the USA

Manufacturer Part Number:

  • SP80PRO – 80 CFM*
  • SP125PRO – 125 CFM*
  • SP160PRO – 160 CFM*

*CFM is an abbreviation for cubic feet per minute (cu ft/min)

The kit consists of:

  • Soil pick – choice of 80, 125 or 160 CFM*
  • 36.5″ straight barrel length
  • 2.5″ nozzle attachment

Effective cutting depth:

  • SP80 – 100mm (4″)
  • SP125 – 100mm (4″)
  • SP160 – 200mm (8″)

Air volume:

  • SP80 – 2265 L/Min
  • SP125 – 3540 L/Min
  • SP160 – 4531 L/Min

To see our entire safety equipment range, click here.

Read More
mbw water nozzle attachment sprayer set - 21372

MBW Water Nozzle Attachment Sprayer Set – 21372

0 customer reviews

The MBW water nozzle attachment is designed to add extra functionality to the soil pick. It turns your existing tool into a cleaning pressure washer. Water is typically supplied from a 5 gallon plastic can or bucket, which can last up to 7 minutes. Capable of 1.4 gallons of water flow per minute. Ideal for leaving jobs clean and tidy.

Features:

  • Fits all models of high-velocity soil picks
  • 6 inch long sprayer nozzle
  • Supplied with 10 foot hose
  • Made in the USA

The kit consist of:

  • Sprayer nozzle adapter
  • 10 foot clear hose
  • Extender metal tube

Manufacturer Part Number: 21372

To see our entire safety equipment range, click here.

Read More
temporary image

Mini Gas Purge Ejector – High Velocity

0 customer reviews

The high velocity mini purge ejector is a robust and reliable tool designed to purge gas pipes prior to abandonment. Simply attaches to an end of isolated gas pipe, while the other end of the main is open to create a negative pressure and vacuum. This results in withdrawal effect, which works on Venturi principal.  The high velocity mini purge ejector ensures safe, fast and effective operation. Suitable for the pipe size ranging from 75mm (3″) up to 300mm (12″) in diameter.

 

Features:

  • Simple and easy to use
  • Durable and lightweight design
  • Extension tube system and Wask hood
  • Side handles and claw coupler for the air compressor hose
  • Supplied with a restraining hose whip-check
  • Made in the UK

 

To see our entire purging tools range click here.

Read More
110-180mm post squeeze off multi-size re-rounding clamp tool for gas and water plastic pipe

Multi Size Pipe Re-rounding Clamp 110mm – 180mm

A multi size pipe re-rounding clamp is also referred to as a rerounder or rerounding tool. It can be used for a number of applications. Mainly as a post squeeze off tool and/or as a rerounding clamp prior to electrofusion or butt-fusion to remove pipe ovality. Suitable for use on standard, medium and high-density polyethylene pipes (PE, MDPE, HDPE). This particular multi size pipe re-rounding clamp is available in two different size ranges, from 63mm to 90mm and 110mm up to 180mm in diameter.

Features:

  • Offers increased productivity
  • Powder coated solid steel body construction
  • Suits all pipe wall thicknesses (SDR ratings) within its range
  • Hinged and single nut design
  • Wide contact area
  • Swing bolt and interchangeable shims
  • Made in the UK

To see our entire re-rounding clamp range, click here.

Read More
temporary image

Non-Reversible Impact Searcher Bar Type A2 – A8

0 customer reviews

The reversible impact searcher bar is also known as a bar hole or safe way plunger, and is used for making a hole in the ground. This takes place prior to taking a reading while locating gas leaks. Must-have equipment for Escape, Locate and Repair (ELR) engineers. The handle is insulated by means of a 1/4″ (6mm) thick rubber covering bonded onto the tube. The non-reversible impact searcher bar spike is made from nickel, chrome, and molybdenum steel to give strength and durability.

non-reversible impact searcher bar diagram

Features:

  • Simple and easy to use
  • Available in a range of lengths
  • Individually tested in accordance with BS3054 standards
  • Conforms to Gas Industry Standard GIS/E8:2006
  • Made in the UK

To see our entire safety equipment range, click here.

Read More
plant nappy spill containment tray

Plant Nappy Spill Containment Tray

0 customer reviews

The plant nappy has been designed to be a secondary oil, fuel, and fluid spill containment catching tray. the side wall allows rainfall to escape at a considerable rate but also filters out any oil residue that may have been picked up by water. Liners offer the same features as the internal base but with one key difference, the liner is removable. The internal base offers rapid adsorption of oils and fuels, but more importantly, it traps the oil in one place.

Features:

  • Simple and easy to use
  • Available in a range of sizes
  • Ideal to prevent spillages
  • Fire retardant and UV resistant
  • Oil, abrasion and chemical resistant
  • Temperature resistance -20°C to -107°C
  • Melt point 157°C
  • Manufactured in the UK

Size and absorbency:

  • Small – 500mm x 685mm – 2.3L
  • Medium – 1000mm x 685mm – 4.5L
  • Large – 2000mm x 1370mm – 18L

To see our entire safety equipment range, click here.

Read More
pneumatic multi function spade kit

Pneumatic Multi Function Spade Kit

0 customer reviews

A pneumatic multi-function spade, also known as a turbo chisel tool, has been designed to offer versatility and improve productivity. This powerful compressed air tool can be used for a number of applications, as it offers a huge selection of attachments, which can be changed within seconds. This makes it an ideal and effective piece of equipment for civil engineering, groundworks, utility and keyhole applications. Available in lengths ranging from 500mm to 1200mm.

Features:

  • Simple and easy to use
  • Available in a range of tenths
  • Low centre of gravity
  •  Versatile and lightweight design
  • Supplied in a metal carry case
  • Made in Germany

The kit consists of:

  • Turbo spade tool
  • Compressed air hose adapter
  • Air hose – 10m length
  • In-line oiler
  • Lubricating oil
  • Gloves
  • Eye protection
  • Ear protection plugs
  • Metal storage case

To see our entire safety equipment range, click here.

Read More

Rems EVA Manual Pipe Threading Machine 1/2″ – 2″

0 customer reviews

The Rems 520017 manual pipe threading machine offers comfortable grip, the Rems Eva provides excellent start cutting and overall threading. Commonly used by many trades.

Ratchet lever

The ratchet lever is made from top quality steel then plastic coated for comfortable use, the handle has serrations for maximum grip and the ratchet rotation is extremely simple to operate. The die heads seat perfectly into the lever head offering fast and easy die changeover.

Die heads

The die heads are manufactured from high grade steel and are fully tempered and hardened to ensure long die life. Perfect design enables the user to experiences excellent start cutting, easy threading and no die stalling over long length threading. The dies have long pipe guidance for perfect centering and the chip holes are wider at the outside of the dies to offer good chip flow and clean threads. The die heads seat perfectly into the lever head offering fast and easy die changeover. Rems dies are universal to all Rems threading tools and virtually indestructible in use, this keeps die stocking down and makes for a very cost effective option.

Thread-cutting oil

To prolong die life we strongly recommend using Rems® Spezial and Sanitol cutting oils. Supplied in a steel carry case.

Features:

  • Simple and easy to operate
  • Ideal for right and left hand threads
  • Long pipe guidance for perfect alignment
  • Fast and easy die changeover
  • Made in Germany

 

The kit consists of:

  • Amigo 2 110V electric pipe threader
  • 1/2″, 3/4″, 1 1/4″, 1 1/2″ and 2″ BSPT dies
  • Metal carry case

 

Manufacturer’s Part No. 520017

 

To see our entire metallic tooling range click here.

Read More
temporary image

Reversible Impact Searcher Bar – Type A1

0 customer reviews

The reversible impact searcher bar is also known as a bar hole or safe way plunger, and is used for making a hole in the ground. This takes place prior to taking a reading while locating gas leaks. Must-have equipment for Escape, Locate and Repair (ELR) engineers. The handle is insulated by means of a 1/4″ (6mm) thick rubber covering bonded to the tube. The reversible impact searcher bar spike is made from nickel, chrome, and molybdenum steel to give strength and durability.

Features:

  • Simple and easy to use
  • Reversible spike 8″ (205mm) to 15″ (380mm)
  • Individually tested in accordance with BS3054 standards
  • Conforms to Gas Industry Standard GIS/E8:2006
  • Made in the UK

To see our entire safety equipment range, click here.

Read More

Ridgid Pipe Cutter Crackers – 246

0 customer reviews

The Ridgid 246 soil pipe cutter, often referred to as crackers, has been designed to provide safe and quick operation. Ratchet action handle parallel to pipe allows for application in narrow trenches. The pipe crackers requires minimum clearance around the pipe and is capable of cutting 1.5″ to 6″ clay, cast-iron or cement pipe. Full lifetime warranty, for full details refer to manufacturer’s website.

 

Features:

  • Simple and easy to use
  • Parallel ratchet action handle
  • Ideal for use in hard to reach places
  • Hand handle guard to add an extra protection for the user
  • Made in the USA

Cutting capacity:

  • Concrete pipe – 4″ to 6″
  • Clay pipe – 1.5″ to 6″
  • Class 22 water main – 4″
  • Extra heavy-duty cast iron soil pipe – 2″ to 5″
  • Service weight cast iron soil pipe – 1.5″ to 6″
  • No hub cast iron soil pipe – 1.5″ to 6″

 

Manufacturer’s Part No. 32900

 

Disclaimer: Ridgid® is a registered trademark of RIDGID, Incorporation.

 

To see our entire metallic tooling range click here.

Read More
richard carter round mouth insulated shovel - 10" x 12.5"

Round Mouth Insulated Shovel – 10″ x 12.5″

0 customer reviews

The Richard Carter round mouth insulated handle shovel has been designed for excavating and digging, as well as shovelling. Shocksafe® range offers a wide selection of digging and striking tools continually developed for and with, professionals for over 15 years. Integrated treads provide better grip, increased comfort, and protection for the user’s feet. The polyfibre handle offers optimum strength and insulating properties. A triple-reinforced and extra-wide grip section is tailored to accommodate work gloves and larger hands. Made in conformance with BS8020:2011 and flash tested to 10,000 Volts.

Features:

  • Integrated spade treads for increased comfort and protection
  • Individually traceable
  • Conforms to BS8020:2011 standards
  • Shocksafe® insulated handle measuring 711mm (28″)
  • Spade size 255mm (10″) wide by 320mm (12.5″) long
  • Weight: 2.5kg
  • Made in the UK

Manufacturer Part Number: 2RTRPFINS.

To see our entire general tool range, click here.

Read More
richard carter square mouth insulated shovel - 10" x 12.5"

Square Mouth Insulated Shovel – 10″ x 12.5″

0 customer reviews

The Richard Carter square mouth insulated handle shovel has been designed for shovelling out, concrete mixing and backfilling trenches. Shocksafe® range offers a wide selection of digging and striking tools continually developed for and with, professionals for over 15 years. Integrated treads provide better grip, increased comfort, and protection for the user’s feet. The polyfibre handle offers optimum strength and insulating properties. A triple-reinforced and extra-wide grip section is tailored to accommodate work gloves and larger hands. Made in conformance with BS8020:2011 and flash tested to 10,000 Volts.

Features:

  • Ideal for shovelling, mixing and backfilling
  • Integrated spade treads for increased comfort and protection
  • Individually traceable
  • Conforms to BS8020:2011 standards
  • Shocksafe® insulated handle measuring 711mm (28″)
  • Spade size 255mm (10″) wide by 320mm (12.5″) long
  • Weight: 2.5kg
  • Made in the UK

Manufacturer Part Number: 2STRPFINS

To see our entire general tool range, click here.

Read More
richard carter taper mouth insulated shovel - 10" x 12.5"

Taper Mouth Insulated Shovel – 10″ x 12.5″

0 customer reviews

The Richard Carter taper mouth insulated shovel is ideal for shovelling out or mixing concrete, working tarmac and cement, backfilling trenches, and manoeuvring ballast.Shocksafe® range offers a wide selection of digging and striking tools for and with professionals for over 15 years. Integrated treads provide better grip, increased comfort, and protection for the user’s feet. The polyfibre handle offers optimum strength and insulating properties. A triple-reinforced and extra-wide grip section is tailored to accommodate work gloves and larger hands. Made in conformance with BS8020:2011 and flash tested to 10,000 Volts.

Features:

  • Integrated spade treads for increased comfort and protection
  • Individually traceable
  • Conforms to BS8020:2011 standards
  • Shocksafe® insulated handle measuring 711mm (28″)
  • Spade size 255mm (10″) wide tapering to 215mm (8.5″) by 320mm (12.5″) long
  • Weight: 2.5kg
  • Made in the UK

Manufacturer Part Number: 2TTRPFINS

To see our entire general tool range, click here.

Read More
Menu