mbw logo

2.5″ MBW Soil Pick PRO Straight Nozzle

0 customer reviews

The interchangeable 2.5″ MBW soil pick Pro straight nozzle has been designed so it can be easily changed for angled attachments, as well as repalced once worn out at a fraction of the cost of the new barrel. Supplied as a direct replacement part without a rubber deflector.

Features:

  • Available in 3 models 80, 125, 160 CFM*
  • 2.5″ (6.4cm) interchangeable nozzle
  • Non-conductive and non-sparking barrel and nozzle
  • Lightweight, yet durable construction
  • Air stream velocity of 1475mph (2375km/h)
  • Made in the USA

Manufacturer Part Numbers:

  • 21608 – SP80 – 80 CFM*
  • 21377 – SP125 – 125 CFM*
  • 21610 – SP160 – 160 CFM*

* CFM is an abbreviation for cubic feet per minute (cu ft/min)

Please note: This product will only fit Pro extension barrels.

To see our entire safety equipment range, click here.

Read More
21" mbw soil pick straight extension - 03849

21″ MBW Soil Pick Straight Extension – 03849

0 customer reviews

The 21″ MBW soil pick straight extension is specifically designed to help access hard to reach places. It can also be used in conjunction with angled attachments. Up to six extensions can be added to the soil pick at the same time.

Features:

  • 21″ (53cm) length extension tube
  • Non-conductive and non-sparking barrel brass ends
  • Lightweight, yet durable construction
  • Air stream velocity of 1475mph (2375km/h)
  • Made in the USA

Manufacturer Part Number: 03849

To see our entire safety equipment range, click here.

Read More
temporary image

Air Drive Tool Compressor Hose

0 customer reviews

Short length of an air tool compressor hose for pneumatic system tools. Ideal for air drive drills and reciprocating saws. Supplied with a restraining whip check.

 

Features:

  • Simple and easy to install
  • Lightweight and durable
  • Compressor hose Q type claw coupling
  • Made out of rubber
  • Length: 500mm (20ins.)
  • 3/8″ BSP male fitting

 

To see our entire general tools range click here.

Read More

BW Gas Monitor Calibration MicroDock II XT

0 customer reviews

The BW Technologies MicroDock II calibration station has been designed as a cost-effective way to manage calibration and bump testing. It reduces maintenance costs and allows you to supervise your fleet of gas detectors in the most efficient way. One base station with one AC outlet supports up to 10 modules to suit your application. Can be used as a standalone unit or connected via a LAN to your existing network.

Features:

  • Simple and easy to use
  • Fully portable and easily expandable
  • Compatible with BW Fleet Manager software

Functions:

  • Configuration
  • Bump check
  • Calibration
  • Download events and data
  • Archive information
  • Charging

To see our entire safety equipment range, click here.

Read More

Cable Pulling Steel Bellmouth Hinged

0 customer reviews

A cable pulling steel bellmouth is developed to prevent damage to both the cable or the duct during pipe and cable laying operations. The guide tool is inserted into pipe or duct and secured in position with an expansion bolt. Available with or without a guide roller, models fitted with it offer additional rope guidance and protection.

 

Features:

  • Simple and easy to use
  • Reduces friction and minimises damage
  • Hinged halves body design
  • Made out of solid steel
  • Made in the UK

 

To see our entire general tools range click here.

Read More
Cable Roller Towing Swivel Link 2 - 5 Ton

Cable Roller Towing Swivel Link 2 – 5 Ton

0 customer reviews

The cable roller towing swivel link, sometimes referred to as connection aid eye, enables winch wire rope to revolve during cable pulling preventing twisting or kinking. The towing head connector link reduces torsion strain and increases pulling force.

 

Features:

  • Simple and easy to use
  • Ideal for cable and pipe laying
  • Replaceable breakaway screw pins
  • Available in a range of variations
  • Manufactured from solid steel
  • Made in the UK

To see our entire general tools range, click here.

Read More
temporary image

CAT & Genny Marker Spray Stencil

0 customer reviews

The CAT (Cable Avoidance Tool) and Genny marker spray stencil have been designed to reduce the volume of paint being sprayed onto the work area. This results in cost savings and less environmental impact. In addition to this, it makes the job look more tidy.

Features:

  • Simple and easy to use
  • Letters and symbols
  • Lower volumes of marker sprays used
  • Helps reduce environmental impact
  • Made in the UK

To see our entire safety equipment range, click here.

Read More
Christmas Tree Pipe Scraper Attachment 2" - 24"

Christmas Tree Pipe Scraper Attachment 2″ – 24″

0 customer reviews

The pipe scraper, often called christmas tree and drag scraper is an effective towing attachment to remove hard deposits from a metallic pipes. Available in sizes ranging from 2″ (50mm) to 24″ (600mm).

 

Features:

  • Simple and easy to use
  • Double ended towing eye
  • Made up of a number of spring steel scrapers
  • Available in sizes from 2″ to 24″
  • Manufactured in the UK

 

To see our entire metallic tooling range, click here.

Read More
Duct Towing Brush Attachment 2" - 12"

Duct Towing Brush Attachment 2″ – 12″

0 customer reviews

The duct towing brush attachment has been developed to remove dirt and debris. Supplied with a towing eye on both ends for pulling through electrical or communication ducts.

 

Features:

  • Simple and easy to use
  • Double ended towing eye
  • Available in sizes from 2″ (50mm) to 12″ (300mm)
  • Made in the United Kingdom

 

To see our entire general tools range, click here.

Read More
90mm electrofusion squeeze off tool for gas and water plastic pipe

Electrofusion Squeeze Off Tool 55mm – 90mm

This particular electrofusion squeeze off tool is designed to control the flow of gas and water within polyethylene (PE) pipes ranging from 55mm to 90mm in diameter. Commonly used for repair and connection operations, enabling work to be undertaken while the pipeline is under pressure. The pipe is squeezed shut in a controlled manner by simply turning the handle in a clockwise direction.

Features:
  • Simple and easy to use
  • Removable lower squeeze off bar
  • Labelled built-in stop plates
  • Extended T-bar handle
  • Solid steel body construction
  • Conforms to Gas Industry Standards GIS/PL2-7:2013
  • Made in the UK

To see our entire squeeze off tooling range, click here.

Read More
Expanding Pipe Stopper Insert 2" - 26"

Expanding Pipe Stopper Insert 2″ – 26″

0 customer reviews

The expanding pipe stopper insert also referred to as drain plug or sealing bung, has been developed to prevent the ingress of ducts, gas, water, debris, etc. It helps temporarily seal the end of an open pipe for basic air testing and general maintenance. The seals are made from a natural rubber and all plugs conform to British Standard BS8005. Suitable for used with the rope blower tee which has been designed to simply and efficiently draw ropes into pipes and cable ducts.

Features:

  • Simple and easy to use
  • Available in sizes from 2″ to 26″
  • Ideal for debris prevention, maintenance and testing
  • Lightweight and robust design
  • Conforms to BS8005 standards
  • Made in the United Kingdom

Imperial Size | Pipe range:

  • 2″ | 49-60mm
  • 3″ | 73-85mm
  • 4″ | 94-110mm
  • 4.5″ | 108-120mm
  • 5″ | 121-138mm
  • 6″ | 146-163mm
  • 7″ | 170-195mm
  • 8″ | 191-211mm
  • 9″ | 216-235mm
  • 10″ | 244-260mm
  • 11″ | 275-305mm
  • 12″ | 296-314mm
  • 13″ | 315-350mm
  • 14″ | 340-375mm
  • 15″ | 365-400mm
  • 16″ | 390-425mm
  • 17″ | 415-440mm
  • 18″ | 440-475mm
  • 20″ | 495-525mm
  • 21″ | 520-555mm
  • 22″ | 534-569mm
  • 24″ | 590-630mm
  • 26″ | 640-675mm

 

To see our entire general tools range click here.

Read More
temporary image

Foam 17.5mm Aplicator Gun

0 customer reviews
  Features: Simple and easy to use Lightweight, yet durable construction Made out of aluminium Manufactured in the UK Suitable for injecting: Manufacturer’s part number: To see our entire gas…
Read More
Foam Pig Insert Plain 2" - 24"

Foam Pig Insert Plain 2″ – 24″

0 customer reviews

The plain foam pig insert is pushed through a pipe using compressed air or water to remove dust and fluids. Made from a special foam, which has a high wear resistance and an effective seal capabilities. Available in a range of types and sizes.

 

Features:

  • Lightweight and easy to handle
  • Bidirectional operation
  • Available in sizes from 2″ (50mm) to 24″ (600mm)
  • Made in the UK

Size | Diameter | Length :

  • 2″ | 70mm | 130mm
  • 3″ | 100mm | 180mm
  • 4″ | 140mm | 255mm
  • 5″ | 165mm | 265mm
  • 6″ | 190mm | 280mm
  • 7″ | 215mm | 300mm
  • 8″ | 240mm | 310mm
  • 9″ | 265mm | 350mm
  • 10″ | 310mm | 405mm
  • 11″ | 325mm | 450mm
  • 12″ | 340mm | 510mm
  • 14″ | 400mm | 580mm
  • 16″ | 445mm | 610mm
  • 18″ | 495mm | 710mm
  • 20″ | 545mm | 780mm
  • 22″ | 595mm | 840mm
  • 24″ | 650mm | 915mm

 

To see our entire general tools range, click here.

Read More
Foam Pig Insert Sealed End 2" - 24"

Foam Pig Insert Sealed End 2″ – 24″

0 customer reviews

The foam pig insert with sealed end is pushed through a pipe using compressed air or water to remove dust and fluids. Made from a special foam, which has a high wear resistance and an effective seal capabilities. Available in a range of types and sizes.

 

Features:

  • Lightweight and easy to handle
  • Impermeable bonded disc at one end
  • Available in sizes from 2″ (50mm) to 24″ (600mm)
  • Made in the UK

Size | Diameter | Length :

  • 2″ | 70mm | 130mm
  • 3″ | 100mm | 180mm
  • 4″ | 140mm | 255mm
  • 5″ | 165mm | 265mm
  • 6″ | 190mm | 280mm
  • 7″ | 215mm | 300mm
  • 8″ | 240mm | 310mm
  • 9″ | 265mm | 350mm
  • 10″ | 310mm | 405mm
  • 11″ | 325mm | 450mm
  • 12″ | 340mm | 510mm
  • 14″ | 400mm | 580mm
  • 16″ | 445mm | 610mm
  • 18″ | 495mm | 710mm
  • 20″ | 545mm | 780mm
  • 22″ | 595mm | 840mm
  • 24″ | 650mm | 915mm

 

To see our entire general tools range, click here.

Read More
Foam Pig Insert Towing Eye 2" - 24"

Foam Pig Insert Towing Eye 2″ – 24″

0 customer reviews

The foam pig towing insert is pushed through a pipe via towing eye using compressed air or water to remove dust and fluids. Made from a special foam, which has a high wear resistance and an effective seal capabilities. Available in a range of types and sizes.

 

Features:

  • Lightweight and easy to handle
  • Metal towing eye attachment and impermeable bonded disc at both ends
  • Available in sizes from 2″ (50mm) to 24″ (600mm)
  • Made in the UK

Size | Diameter | Length :

  • 2″ | 70mm | 130mm
  • 3″ | 100mm | 180mm
  • 4″ | 140mm | 255mm
  • 5″ | 165mm | 265mm
  • 6″ | 190mm | 280mm
  • 7″ | 215mm | 300mm
  • 8″ | 240mm | 310mm
  • 9″ | 265mm | 350mm
  • 10″ | 310mm | 405mm
  • 11″ | 325mm | 450mm
  • 12″ | 340mm | 510mm
  • 14″ | 400mm | 580mm
  • 16″ | 445mm | 610mm
  • 18″ | 495mm | 710mm
  • 20″ | 545mm | 780mm
  • 22″ | 595mm | 840mm
  • 24″ | 650mm | 915mm

 

To see our entire general tools range, click here.

Read More
Foam Pig Towing Rope End 2" - 24"

Foam Pig Towing Rope End 2″ – 24″

0 customer reviews

The foam pig towing insert is pushed through a pipe via rope end using compressed air or water to remove dust and fluids. Made from a special foam, which has a high wear resistance and an effective seal capabilities. Available in a range of types and sizes.

 

Features:

  • Lightweight and easy to handle
  • Rope attachment and impermeable bonded disc at both ends
  • Available in sizes from 2″ (50mm) to 24″ (600mm)
  • Made in the UK

Size | Diameter | Length :

  • 2″ | 70mm | 130mm
  • 3″ | 100mm | 180mm
  • 4″ | 140mm | 255mm
  • 5″ | 165mm | 265mm
  • 6″ | 190mm | 280mm
  • 7″ | 215mm | 300mm
  • 8″ | 240mm | 310mm
  • 9″ | 265mm | 350mm
  • 10″ | 310mm | 405mm
  • 11″ | 325mm | 450mm
  • 12″ | 340mm | 510mm
  • 14″ | 400mm | 580mm
  • 16″ | 445mm | 610mm
  • 18″ | 495mm | 710mm
  • 20″ | 545mm | 780mm
  • 22″ | 595mm | 840mm
  • 24″ | 650mm | 915mm

 

To see our entire general tools range, click here.

Read More

Gas Flame Arrester Trap End 3/4″ – 2″

0 customer reviews

The flame arrester trap ends, also known as gas safety vent, has been designed to contain or extinguish the flame, as well as prevent flashback. Suitable for the purging and venting of live gas pipes, this includes services or mains. To be used with natural gas and LPG, do not use with refrigeration or hydrogen gases.

 

Features:

  • Available in a range of sizes
  • Made out of pressure die-cast aluminium
  • Tested to BS 7244: 1990 and BS EN 12874:2001
  • Manufactured in the UK

 

To see our entire purging tools range click here.

Read More

Gas Pipe Purge Hose 3/4″ – 1″

0 customer reviews

The flexible gas pipe purge hose has been specifically designed to be used for the purging or venting of live domestic and commercial pipes. These processes ensure venting out the gas or air into the atmosphere, prior to abandonment and commissioning. Flame arrester end serves a crucial safety protection to  contain or extinguish the flame, as well as prevent flashback. The gas pipe purge hose is available in a range of sizes and lengths. Can be supplied with or without flame trap end.

 

Features:

  • Simple and easy to use
  • Available in a range of sizes and lengths
  • Swivel brass union connection
  • Made out of lightweight, reinforced and clear PVC hose
  • Manufactured in the UK

 

To see our entire purging tools range click here.

Read More
temporary image

GMI Gascoseeker Hydrophobic Filter – 12358

0 customer reviews

A GMI Gascoseeker hydrophobic filter is fitted in the inlet of the instrument flow path to prevent water being drawn through the flow path. The effect of water being drawn up against the filter unit is to initiate a ‘Sample Fault’ flag in the LCD display.

Features:

  • Simple and easy to replace
  • Fitted with an o-ring
  • Supplied individually
  • Made in the UK

 

Caution: The instrument should never be switched on without suitable filters installed.

 

Manufacturer’s Part No. 12358

 

Disclaimer: Gascoseeker® is a registered trademark of Teledyne Gas Measurement Instruments Limited.

 

To see our entire consumable range click here.

Read More

Goliath Safety Digging Boots Steel Toe Cap

0 customer reviews

The Goliath safety boots are truly the ultimate footwear for digging. Featuring padded collar for a secure fit, ankle support, and to keep debris out of the boots. All key seams are triple stitched for long life. An excellent quality work boots for groundworks, civils, utilities, engineering and construction workers.

Features:

  • Available in a range of sizes
  • Upper material:  Black waxy buffalo leather
  • External ridged rubber bump cap for long wear life
  • Oil, heat, slip, acid resistant and anti-static out-sole
  • Impact resistant steel toe cap to 200 joules
  • Heat resistant to 300°C
  • Made to the highest standards of quality
  • Conforms to EN ISO 20345 S3 CI HI HRO SRC: 2011

To see our entire safety equipment range, click here.

Read More